![]() Good luck and hopefully someone can confirm this solution as well. So make sure to close this window right before you start the update process! When the NS tries to reboot, this first window starts to look for the NS to list it (as shown in the picture) and this prevents the NS from going into update mode. But the first window remains open and lists the NS.ĥ. This opens a new window that enables you to start the update processĤ. you have to launch LaCie Network Assistentģ. ![]() This window is the culprit which prevents the NS from rebooting into update mode. Quite by chance I then got it to work, by closing this window right after the NAS went down for reboot: See Seagate Network Assistantfor instructions. It will also provide quick access to shares and NAS OS. I tried this countless times and always this error appeared. Seagate Network Assistant gives you instant information on your Seagate NAS, such as firmware version, IP address, and MAC address. And proceeded to follow these rather simple instructions.īut I kept getting an error and it was really frustrating.Īs you can see from the error message, after starting the update process, the NAS does not reboot into update mode, and the error is displayed. Mac Users: Select LaCie Network Assistant in your Applicationsfolder. Right-click on the icon in the system tray. The application icon will appear in the system tray and LaCie Network Assistant will automatically detect your LaCie device on the network. I downloaded firmware version 1.1.8 from here. Select LaCie Network Assistant in Start > Programs. The upgrade was not as easy as I expected. ![]() If you bought your LaCie Network Space (NS from now on) about half a year ago, you may or may not be aware that there is a new firmware update. 15Dec/09 Off LaCie Network Space: unable to upgrade firmware through OSX ![]()
0 Comments
Leave a Reply. |